Bearing Grease SKF LGWM 1

MINERAL OIL-BASED GREASE / FOR BEARINGS / FOR BEARING UNITS / LOW-TEMPERATURE SKF LGWM 1

SKF MAINTENANCE AND LUBRICATION PRODUCTS SKF LGWM 1

Extreme pressure low temperature grease

The Bearing Grease SKF LGWM 1 Tags:
LGWM 1 Type:mineral oil-based;
LGWM 1 Product applications:for bearings, for bearing units;
LGWM 1 Operating temperature:
Min.: -30°C(-22 °F)
Max.: 110 °C (230 °F)
Email:  
Add To Cart SKYPE
SKF LGWM 1 Data
SKF LGWM 1 is a low consistency mineral oil based grease, using a lithium soap and containing extreme pressure additives. It is extremely suitable for the lubrication of bearings operating under both radial and axial loads.
  • Good oil film formation at low temperatures down to –30 °C (–20 °F)
  • Good pumpability down to low temperatures
  • Good corrosion protection
  • Good water resistance
Typical applications:
  • Wind turbine main shafts
  • Screw conveyors
  • Centralised lubrication systems
  • Spherical roller thrust bearing applications
Available pack sizes
Packsize Designation
420 ml cartridge LGWM 1/0.4
5 kg can LGWM 1/5
50 kg drum LGWM 1/50
180 kg drum LGWM 1/180
Electro-mechanical lubricant dispensers  
TLMR 101 series 380 ml refill (incl. battery) LGWM 1/MR 380B
TLMR 201 series 380 ml refill LGWM 1/MR380
Technical data
Designation LGWM 1/(pack size)
DIN 51825 code KP1G-30
NLGI consistency class 1
Thickener Lithium
Colour Brown
Base oil type Mineral
Operating temperature range –30 to +110 °C
(–20 to +230 °F)
Dropping point DIN ISO 2176 >170 °C (>340 °F)
Base oil viscosity  
40 °C, mm²/s
100 °C, mm²/s
200
16
Penetration DIN ISO 2137  
60 strokes, 10–1 mm
100 000 strokes, 10–1 mm
310–340
+50 max.
Corrosion protection:  
Emcor:
– standard ISO 11007
– water washout test
0–0
0–0
Water resistance  
DIN 51 807/1, 3 hrs at 90 °C 1 max.
Oil separation  
DIN 51 817, 7 days at 40 °C, static, % 8–13
Copper corrosion  
DIN 51 811
2 max. at 90 °C (>195 °F)
EP performance  
Wear scar DIN 51350/5, 1 400 N, mm
4–ball test, welding load DIN 51350/4, N
1,8 max.
3 200 min.*
Fretting corrosion  
ASTM D4170 (mg) 5,5*
* Typical value