Bearing Grease SKF LGHP 2

MINERAL OIL-BASED GREASE / FOR BEARINGS / FOR BEARING UNITS / HIGH-TEMPERATURE SKF LGHP 2

SKF MAINTENANCE AND LUBRICATION PRODUCTS SKF LGHP 2

High performance, high temperature grease

The Bearing Grease SKF LGHP 2 Tags:
LGHP 2 Type:mineral oil-based;
LGHP 2 Product applications:for bearings, for bearing units;
LGHP 2 Operating temperature:
Min.: -40°C(-40 °F)
Max.: 150 °C (302 °F)
Email:  
Add To Cart SKYPE
SKF LGHP 2 Data
SKF LGHP 2 is a premium quality mineral oil based grease, using a modern Polyurea (di-urea) thickener. It is suitable for electric motors and similar applications.
  • Extremely long life at high temperatures
  • Wide temperature range
  • Excellent corrosion protection
  • High thermal and mechanical stability
  • Good start-up performance at low temperatures
  • Compatibility with common polyurea and lithium thickened greases
  • Low noise properties
Typical applications:
  • Electric motors: Small, medium and large
  • Industrial fans, including high speed fans
  • Water pumps
  • Rolling bearings in textile, paper processing and drying machines
  • Applications with medium and high speed ball (and roller) bearings operating at medium and high temperatures
  • Clutch release bearings
  • Vertical shaft applications
  • Kiln trucks and rollers
Available pack sizes
Packsize Designation
420 ml cartridge LGHP 2/0.4
1 kg can LGHP 2/1
5 kg can LGHP 2/5
18 kg pail LGHP 2/18
50 kg drum LGHP 2/50
180 kg drum LGHP 2/180
Gas driven lubricators  
LAGD series 60 ml LAGD 60/HP2
LAGD series 125 ml LAGD 125/HP2
Electro-mechanical lubricators  
TLSD series 125 ml TLSD 125/HP2
TLSD series 125 ml refill LGHP 2/SD125
TLSD series 250 ml TLSD 250/HP2
TLSD series 250 ml refill LGHP 2/SD250
Electro-mechanical lubricant dispensers  
TLMR 101 series 380 ml refill (incl. battery) LGHP 2/MR 380B
TLMR 201 series 380 ml refill LGHP 2/MR380
Technical data
Designation LGHP 2/(pack size)
DIN 51825 code K2N-40
NLGI consistency class 2–3
Thickener Di–urea
Colour Blue
Base oil type Mineral
Operating temperature range –40 to +150 °C
(–40 to +300 °F)
Dropping point DIN ISO 2176 >240 °C (>465 °F)
Base oil viscosity  
40 °C, mm²/s
100 °C, mm²/s
96
10,5
Penetration DIN ISO 2137  
60 strokes, 10–1 mm
100 000 strokes, 10–1 mm
245–275
365 max.
Mechanical stability  
Roll stability, 50 hrs at 80 °C, 10–1 mm 365 max.
Corrosion protection  
Emcor:
– standard ISO 11007
– water washout test
– salt water test  (100% seawater)
0–0
0–0
0–0
Water resistance  
DIN 51 807/1, 3 hrs at 90 °C 1 max.
Oil separation  
DIN 51 817, 7 days at 40 °C, static, % 1–5
Lubrication ability  
R2F, running test B at 120 °C Pass
Copper corrosion  
DIN 51 811
1 max. at 150 °C (300 °F)
Rolling bearing grease life  
R0F test L50 life at 10 000 r/min., hrs 1 000 min. at 150 °C (300 °F)
Fretting corrosion  
ASTM D4170 (mg) 7*
* Typical value